1ch Ewelink Tuya Zigbee 3.0 Smart Switch

1ch Ewelink Tuya Zigbee 3.0 Smart Switch,dc5v 12v 32v Pulse Relay,support Sonoff Zigbee Bridge Gatew
The product is shipped based on the color or size of the main image of the product page.
The Zigbee switch support Zigbee protocol, Dont support
4G WiFi protocol.It require ewelink gateway hub,Sonoff Zigbee gateway Bridge,Tuya gateway hub.so it can be add in eWeLink APP or Tuya APP.Note
The relays is passive output(dry contact), No matter the power you supply in the input, the output dont have same voltage, you also need to supply power in output.The RF433 remote controller dont include batteryBattery type
CR2032Battery type
27A 12VThe Picture of the battery is in the end of the page.Two Working Mode
Inching mode
Switch on one channel,the channel will be automatically closed after 0.5 seconds .Other channel is same as the channel.
Self
locking
each channel could be switched on/off seperately.You can turn on/turn off all channel at the same time.Zigbee
0The Zigbee switch support Zigbee protocolVoice ControlWorks with Samsung SmartThings hub and Amazon Echo directly.
No Zigbee hub need, It can connect with Samsung SmartThings hub and Amazon Echo directly.Amazon Echo include Amazon Echo Plus(Model
ZE39KL), Echo Show(2nd)(Model
DW84JL), Echo Plus(2nd Gen)(Model
L9D29R).
Support Google assistant and IFTTT(Zigbee hub is required).Works with eWeLink APPIt cant use in eWelink APP without ewelink hub or Sonoff zigbee bridge.Works with Tuya APPIt can not use in tuya APP without Tuya zigbee hub.Inching modeyou can have two wiring ways to select
Turn on 0.5s and then auto
off /Turn off 0.5s and then auto
on.Inching timeEnabling this feature,it will automatically switch off after 0.5secondsFor Door AccessFor electric motor lockSupport RF433Mmhz ControlHow to pair RF433 remote controller with with the devices.
Press the RF433 pairing button in the device for 4 seconds,and wait until the light become red.
Press any key match of remote controller, and then you can pair the device with remote controller successfullyHow to clear rhe pairing of the device with RF433 Remote ControllerPress the RF433 pairing button for 15seconds, and wait until the blue light become red.It will clear the pairng.Specification