Cnc 3 Axis Tb6600 Stepper Motor Driver Board 4.5a/36v For Engraving Machine

100% brand new and high quality This document describes the basic functionality and the electrical specifications of StepperOnline’s Three Axis TB6600 CNC Driver Board
100% brand new and high quality This document describes the basic functionality and the electrical specifications of StepperOnline’s Three Axis TB6600 CNC Driver Board
Supports MACH3, KCAM4, EMC2 etc
Can drive four channels 4.5A stepper motors, input voltage up to 18V – 40V.
Resolution 1, 1/2, 1/4, 1/8, 1/16 micro stepping output.
100% Full DC-DC optical isolation to protect the user’s computer and equipment.
Four channels of 0.4 – 4.5A adjustable output current for 2/4 phase bipolar stepper driver.
Build with 3 ways relay output and 5 ways limit interface
Automatic idle-current reduction.
Dimension:Approx.18.5cm x 11.2cm x3cm
Quantity:1PC
Electrical Properties(ambient temperature Tj = 25C)
Input Voltage
Input Voltage
12V-45VDC, Recommend DC24V or DC36V
Output Current
Peak Current 5A/phase, 8 Options available
Driving Mode
Constant current PWM Control
Exciting Mode
1, 1/2, 1/4, 1/8, 1/16
Current Setting
Current Setting
Current
Current
0.4A
1.6A
2.6A
3.2A
3.8A
4.0A
4.3A
4.5A
S1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
S2
ON
ON
OFF
OFF
ON
ON
OFF
OFF
S3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
Subdivision Setting
Subdivision
NC
Warning Make sure the power supply voltage dose not exceed the drive’s input range. Double check the connections and make sure the power lead polarity is correct. Do not set high current to small stepper motor. It is possible that the motor will be damaged. Disconnect the motor from the load if you are not sure the move direction. Adjust the axis in the middle before trying to run the motor. Never disconnect the motor lead when the power source is energized.